Olivetti d-Color MF651 Service Manual page 497

Field Service Ver. 2.0 Jul. 2009
E. Print Data Capture
(1) Use
• To set whether to allow or restrict capturing the print job data.
• To be used when carrying out [Service Mode]
(2) Procedure
• The default setting is Allow.
NOTE
• [Allow] cannot be selected when the following setting is set to "ON."
[Administrator Settings]
F. Job Log Settings
(1) Use
• Selects whether to keep logs of operations and access made by users and service engi-
neers.
• To set whether to overwrite existing logs.
• To ensure security, this settings is used to keep logs of operations and access including
security settings changes, authentication, and job executions by users and service engi-
neers.
• Logs are saved in HDD and NVRAM.
(2) Procedure
• The default setting is No.
NOTE
• After selecting "Yes", the main power switch must be turned OFF and ON so that
the new setting takes effect.
• When ON is selected in [Administrator Settings]
[Enhanced Security Mode], this setting is automatically set to "Yes."
<Overwrite>
• Set whether to allow or restrict overwriting existing logs when saving audit logs.
• The default setting is Restrict.
• To erase audit logs, press [Erase Job Log].
G. Restrict Fax TX
(1) Use
• To set whether or not to prohibit sending fax.
(2) Procedure
• The default setting is OFF.
Y110571-1
"Allow"
[Security Setting]
Yes
Allow
ON
Service Manual
[System 2] [Data capture].
Restrict
[Enhanced Security Mode]
"No"
[Security Settings]
"Restrict"
"OFF"
10. UTILITY
437