Olivetti d-Color MF651 Service Manual page 429

Field Service Ver. 2.0 Jul. 2009
H. IPsec Settings
(1) Use
• To set whether to use IPsec protocol for IP network communication.
(2) Procedure
• The default setting is OFF.
• When selecting [ON], make settings in [IKE Setting], [IPSec SA Setting], and [Peer].
I. IPsec Settings-IKE Settings
(1) Use
• To make the settings that relate to IKE (Internet Key Exchange) protocol which is used
for IPsec communication.
• Settings can be made independently for four different sets (Group 1 to 4).
(2) Procedure
<Group>
• Among four groups (Group 1 to 4), select a group where settings are made.
<Encryption Algorithm>
• Set a encryption algorithm used for IPsec communication.
• The default setting is OFF.
DES_CBC
<Authentication Algorithm>
• Set an authentication algorithm used for IPsec communication.
• The default setting is OFF.
MD5
<Key Validity Period>
• Set a key validity period.
• The default setting is 28800 (sec.).
<Diffie-Hellman Group>
• Set Diffie-Hellman group.
• The default setting is Group 2.
Y110571-1
ON
3DES_CBC
SHA-1
80 to 604800 (sec.)
Service Manual
10. UTILITY
"OFF"
"OFF"
"OFF"
369