System Connection-Openapi Settings - Olivetti d-Color MF651 Service Manual

10. UTILITY
E. IP Address Fax Operation Settings
• It will be displayed in d-Color MF651/MF551 machines where the function version is
version 2 or later and in all d-Color MF451 machines.
• It will not be displayed when [IP Address Fax Function] is set to "OFF" in the following
settings.
[Administrator Settings]
Function Settings]
(1) Use
• To set the operational mode applied to IP address fax.
Mode1: This mode allows communication between Olivetti models capable of
transmitting IP address faxes and models compatible with the Direct SMTP
standard defined by CIAJ. However, a unique method developed for Olivetti
models is used to transmit a color fax.
Mode2: This mode allows communication between Olivetti models capable of
transmitting IP address faxes and models compatible with the Direct SMTP
standard defined by CIAJ. The transmission in color mode is performed in the
communication mode (Profile-C format) compatible with the Direct SMTP stan-
dard.
(2) Procedure
<Operation Mode>
• The default setting is Mode1.
• When selecting Mode 2, make color original transmission settings.
10.6.78

System Connection-OpenAPI Settings

A. Access Setting
(1) Use
• To allow or restrict the access from other systems with OpenAPI when using Page Scope
Data Administrator.
(2) Procedure
• The default setting is Allow.
430
[Network Settings]
"Mode1"
"Allow"
Service Manual
Field Service Ver. 2.0 Jul. 2009
[Network Fax Settings]
Mode2
Restrict
[Network Fax
Y110571-1