Fax Settings-Line Parameter Setting - Olivetti d-Color MF651 Service Manual

10. UTILITY
B. Print Receiver's Name
• It will not be displayed on the screen when [Fax Target] is set to beside "US" or "HK" in
the following settings.
[Service Mode]
(1) Use
• To set whether to print the information of TX destination (Registered name or Fax No.)
when transmitting fax.
(2) Procedure
• The default setting is OFF.
C. Footer Position
(1) Use
• To set whether to print the footer when transmitting fax.
(2) Procedure
• The default setting is OFF.
Inside Body Text
NOTE
• [Outside Body Text] cannot be selected for the color mode of Internet Fax/IP
Address Fax.
10.6.70

Fax Settings-Line Parameter Setting

A. Dialing Method
(1) Use
• To set the dialing method.
• The displays are different depending on the country.
(2) Procedure
• The default setting is PB.
NOTE
• The displays are different depending on the country.
B. Receive Mode
• It will not be displayed when the following setting shows that management device 2 is
mounted.
[Service Mode]
(1) Use
• To set the fax reception mode.
• To change to manual reception when using the remote reception function, etc. when con-
nected to the external telephone.
(2) Procedure
• The default setting is Auto RX.
414
[System 1] [Marketing Area]
ON
Outside Body Text
"PB"
[Billing Setting] [Management Function Choice]
"Auto RX"
Service Manual
Field Service Ver. 2.0 Jul. 2009
"OFF"
"OFF"
10 pps
Manual RX
Y110571-1