Mechanical Adjustment Of The Paper Feed Section - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009

16.2 Mechanical adjustment of the paper feed section

16.2.1 Tray3/4 paper size change
This adjustment must be made in the following case:
• Upon user requests, the paper size used for the tray3/4 needs to be changed.
1. Pull out the tray where this adjustment is made.
[2]
[1]
[1]
[1]
Y110571-1
[3]
[1]
[1]
A0P0F3C540DA
[2]
A0P0F3C541DA
A0P0F3C542DA
Service Manual
16. MECHANICAL ADJUSTMENT
2. Remove four screws [1] and remove
the paper guide plates (front [2]/rear
[3]).
3. Remove two screws [1] and remove
the end guide plates [2].
4. Align the paper guide plate (rear)
with the marking on the bottom and
secure it with four screws.
To set B5/8.5/16K sizes:
• Insert the paper guide plate (rear)
into the hole. Align it with the back
marking and secure it.
To set A5/Post card size:
• Insert the paper guide plate (rear)
into the hole. Align it with the front
marking and secure it.
647