10. UTILITY
10.6.74
Fax Settings-Report Settings
A. Activity Report
• It will not be displayed when the following setting shows that vendor or authentication
device is mounted.
[Service Mode]
(1) Use
• To set whether to print out the activity report or not, and also the timing for printing.
(2) Procedure
• The default setting is ON.
• When this setting is set to ON, make the setting of Output Setting.
• The default setting is Every 100 Comm.
Daily
B. TX Result Report
(1) Use
• To set whether to print out the TX report, and also the timing for printing.
(2) Procedure
• The default setting is If TX Fails.
ON
C. Sequential TX Report
(1) Use
• To set whether to print out the sequential TX report or not.
(2) Procedure
• The default setting is ON.
D. Timer Reservation TX Report
(1) Use
• To set whether to print out the reservation TX or not.
(2) Procedure
• The default setting is ON.
E. Confidential RX Report
(1) Use
• To set whether to print out the confidential RX report.
(2) Procedure
• The default setting is ON.
422
[Billing Setting]
[Management Function Choice]
"ON"
"Every 100 Comm."
"If TX Fails"
"ON"
"ON"
"ON"
Service Manual
Field Service Ver. 2.0 Jul. 2009
OFF
100/ Daily
OFF
OFF
OFF
OFF
Y110571-1