Scan Caribration; Lcc Size Setting; Lct Paper Size Setting - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009
D. Printing on paper of nonstandard size fed from the bypass tray (AnySize mode)
(1) Use
• To enable printing only by the setting made on the printer driver when printing is
attempted on paper of nonstandard size fed by way of the bypass tray (the default setting
is the conventional operation).
bit0-0 : Conventional operation
bit0-1 : The print cycle is initiated for the paper specified on the printer driver regard-
less of the bypass tray paper setting.
(2) Procedure
1. Touch [Software Switch Setting].
2. Touch [Switch No.] and enter "69" with the ten-key pad.
3. Touch [BIT Assignment] and select "bit2" with [ ]/[ ] key.
4. Enter "0" or "1" with the 10-key pad.
5. Touch [Fix].
12.9.8

Scan Caribration

• This feature is not available in this machine.
12.9.9

LCC Size Setting

A. Use
• To set the paper size for the LCC.
• Use to change the paper size for the LCC (tray 3/4).
B. Procedure
• The default setting depends on the setting made for the applicable marketing area.
A4 B5
12.9.10

LCT Paper Size Setting

A. Use
• To set a LCT type.
• To set the paper size for the LCT.
• Use this feature upon LCT set-up.
B. Procedure
<LCT type setting>
• The default setting is A4LCT.
"A4LCT"
* For a selected LCT type, set a paper size.
NOTE
• When the LCT type setting is changed, the paper size setting in the LCT is
returned to the default.
<A4LCT>
• The default setting depends on the setting made for the applicable marketing area.
<A3LCT>
• The default setting depends on the setting made for the applicable marketing area.
A3h
11 x 17
Y110571-1
8 1 / x 11 16K
2
A4
B4 A4S
8 / x 14 8 / x 11
1 1
2 2
Service Manual
12. SERVICE MODE
A5 5 1 / x 8 1 /
2 2
A3LCT
8 / x 11
1
2
A4 12 x 18
8 / x 11S
1
2
Post. S
535