System Settings-Auto Color Level Adjust - Olivetti d-Color MF651 Service Manual

10. UTILITY
D. Print Lists
• It will not be displayed when the following setting shows that authentication device or the
vendor is mounted.
[Service Mode]
(It will be displayed when the key counter is mounted.)
• It will not be displayed when the authentication device 1 is set to "Set" by the following
setting.
[Service Mode]
(1) Use
• To set the paper feed tray for output the list for the meter count or the unit check.
• It sets the simplex/duplex printing of the output for the sales counter or the unit check list.
(2) Procedure
<Paper tray>
• The default setting is Tray 1.
<Simplex/Duplex>
• The default setting is 1-Sided.
E. Post Inserter Settings
• It will be displayed only when the optional post inserter PI-505 is mounted.
(1) Use
• To set the paper tray, paper type and paper size for the post inserter.
(2) Procedure
<Paper Tray>
• The default setting is F1.
<Paper Type>
• The default setting is Plain Paper.
"Plain Paper"
<Paper Size>
• The default setting is Auto Detect.
"Auto Detect"
10.5.4

System Settings-Auto Color Level Adjust.

A. Use
• To set the criterion level to discriminate between a colored original and a black-and-white
original in the auto color mode.
B. Procedure
• Five levels are available to choose from and the default setting is 3.
276
[Billing Setting] [Management Function Choice]
[Billing Setting] [Management Function Choice]
"F1"
Thick 1
Standard Size
Black Standard
1 2
Service Manual
Field Service Ver. 2.0 Jul. 2009
F2
Thick 1+
Custom Size
Full Color
"3" 4 5
Thick 2
Y110571-1