Olivetti d-Color MF651 Service Manual page 132

4. PERIODICAL MAINTENANCE PROCEDURE
[1]
6. Select [Service Mode]
release for the fusing unit.
See P.544
72
[1]
A00JF2C058DA
[2]
[3]
A00KF2C508DA
[Counter] [Life]
Service Manual
Field Service Ver. 2.0 Jul. 2009
3. Hold the position as shown in the left
and remove the fusing unit [1].
NOTE
• When removing the fusing unit, grip
it with both hands to avoid letting
the fusing unit fall down.
4. Clean the IH coil unit.
See P.73
5. To reinstall, reverse the order of
removal.
NOTE
• When reinstalling the fusing unit,
be sure to press the fusing unit into
the machine until the surfaces of
the A [1] and B [2] are level with
each other.
To remove unevenness between the
surfaces of the A and B, turn the
misfeed-clearing dial [3] while
pushing the fusing unit into the
machine.
• After ensuring that the surfaces are
level, secure the fusing unit by
tightening the two mounting screws
on the back side first, and then the
front side.
[New Release] and carry out new
Y110571-1