Copier Settings-Finishing Program; Copier Settings-Card Shot Settings - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009
10.5.35

Copier Settings-Finishing Program

A. Use
• Configure whether to display the Finishing Program button in the basic settings screen.
To display the button, register the contents of the finishing program.
Register frequently used finishing functions so that you can set them at once by using
the button that appears in the basic settings screen.
B. Procedure
• The default setting is ON.
• When selecting "ON," select the contents to be registered in the finishing program.
10.5.36

Copier Settings-Card Shot Settings

• It will be displayed in d-Color MF651/MF551 machines where the function version is
version 2 or later and in all d-Color MF451 machines.
• [It will be displayed only when the following setting is set to "Level 2."
[Administrator Settings]
A. Layout
(1) Use
• To set the initial copy layout setting in card shot mode.
(2) Procedure
• The default setting is Top/Bottom.
"Top/Bottom"
B. Zoom
(1) Use
• To set the initial zoom setting in card shot mode.
(2) Procedure
• The default setting is Full Size.
C. Store Original Size
(1) Use
• To pre-register original sizes that are used in card shot mode.
(2) Procedure
• Enter an original size, name it, and register the data.
Y110571-1
"ON"
[Security Settings]
Left/Right (Top Half)
"Full Size"
Service Manual
OFF
[Administrator Security Levels]
Left/Right
x 1.0
10. UTILITY
289