Olivetti d-Color MF651 Service Manual page 356

10. UTILITY
D. Binding Position
(1) Use
• To set the binding direction during duplex printing when not specified by the printer driver
during PC printing.
• To use when binding direction cannot be specified by the printer driver during printing by
Windows DOS, etc.
(2) Procedure
• The default setting is Left Bind.
Top Bind
E. Staple
• It will be displayed only when the optional finisher is mounted.
(1) Use
• To set whether to staple or not when not specified by the printer driver during PC printing.
• To use hen staple is not specified by the printer driver during printing by the Windows
DOS, etc.
(2) Procedure
• The default setting is OFF.
1 Position
F. Punch
• It will be displayed only when the optional finisher and punch kit are mounted.
(1) Use
• To select whether to make punch-holes or not when not specified by the printer driver
during PC printing.
• To use when the printer driver cannot specify punching during printing from Windows
DOS, etc.
(2)
• The default setting is OFF.
* The number of punch holes being set is available from [Service Mode]
G. Banner Paper Tray
(1) Use
• To set the feed tray for printing on the banner (front cover) page.
(2) Procedure
• The default setting is Auto.
296
"Left Bind"
2 Position
2-Hole/3-Hole/4-Hole
Service Manual
Field Service Ver. 2.0 Jul. 2009
Right Bind
"OFF"
"OFF"
[Finisher].
Y110571-1