Printer Settings-Ps Setting - Olivetti d-Color MF651 Service Manual

10. UTILITY
E. CR/LF Mapping
(1) Use
• To set the mode for replacing data when printing the text data.
Mode 1 : CR
Mode 2 : CR=CR LF CR-LF FF CR-FF
Mode 3 : CR CR-LF LF CR-LF FF CR-FF
OFF : Does not replace
(2) Procedure
• The default setting is OFF.
Mode 1
10.5.49

Printer Settings-PS Setting

A. Print PS Errors
(1) Use
• To set whether to print or not the error information when an error occurred during PS ras-
terizing.
(2) Procedure
• The default setting is OFF.
B. ICC Profile Settings
(1) Use
• To select a profile to be used for print jobs from a computer when a profile is not specified
by printer driver.
• Possible to set a profile separately for each of the following items.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
(2) Procedure
• The default settings are shown below.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile : Auto
Simulation Profile
298
CR-LF LF=LF FF=FF
Mode 2
ON
: Device Color
: Auto
: Device Color
: Auto
: Device Color
: None
Service Manual
Field Service Ver. 2.0 Jul. 2009
Mode 3 "OFF"
"OFF"
Y110571-1