Fax Settings-Network Fax Settings - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009
C. Multi Lines Setting
(1) Use
• To set the system for using each line when using more than one line.
(2) Procedure
<Multi Line Usage>
• When selecting [Normal], perform the transmission setting for Line 2.
<Line 2 Setting>
• The default setting is TX and RX.
"TX and RX"
D. Sender Fax No.
(1) Use
• To register the fax ID when using the additional line.
(2) Procedure
• Use 10-key pad or [+] / [space], enter the fax ID (up to 20 characters).
10.6.77

Fax Settings-Network Fax Settings

• It will be displayed only when either [IP Address Fax] or [Internet Fax] is set to "ON" in the
following settings.
[Administrator Settings]
Function Settings]
A. Black Compression Level
• It will be displayed only when either [IP Address Fax] or [Internet Fax] is set to "ON" in the
following settings.
[Administrator Settings]
Function Settings]
(1) Use
• To set black compression level at monochrome TX mode when network fax function is
being used.
(2) Procedure
• The default setting is MH.
"MH"
Y110571-1
RX Only
[Network Settings] [Network Fax Settings]
[Network Settings] [Network Fax Settings]
MR
Service Manual
10. UTILITY
TX Only
[Network Fax
[Network Fax
MMR
427