Olivetti d-Color MF651 Service Manual page 455

Field Service Ver. 2.0 Jul. 2009
(8) Security Level
<Use>
• To set the security level for the reading/writing authority user which is used for SNMP v3.
OFF
auth-password : Conducts authentication only with authentication password when
auth-password/privpassword
<Procedure>
• The default setting is auth-password/privpassword.
OFF
NOTE
• [Authentication OFF] cannot be selected when the following setting is set to "ON."
[Administrator Settings]
(9) Encryption Algorithm
<Use>
• To set the encryption algorithm in SNMPv3 communication.
<Procedure>
• The default setting is DES.
(10) Authentication Algorithm
<Use>
• To set the authentication algorithm in SNMPv3 communication.
<Procedure>
• The default setting is MD5.
E. TRAP Setting
(1) Use
• To set whether or not to allow the TRAP function.
(2) Procedure
• The default setting is Allow.
F. TRAP Setting When Authentication failed
(1) Use
• To set whether or not to enable the TRAP function when authentication failed.
(2) Procedure
• The default setting is Invalid.
Y110571-1
: Authentication will not be conducted when reading/writing authority
user accesses.
reading/writing authority user accesses.
: Conducts authentication by authentication password and privacy
password when reading/writing authority user accesses.
auth-password
[Security Settings]
"DES"
"MD5"
"Allow"
Enable
Service Manual
"auth-password/privpassword"
[Enhanced Security Mode]
AES-128
SHA-1
Restrict
"Invalid"
10. UTILITY
395