Olivetti d-Color MF651 Service Manual page 354

10. UTILITY
F. Banner Sheet Setting
(1) Use
• To set whether or not to print on the banner (front cover) page.
(2) Procedure
• The default setting is OFF.
G. Binding Direction Adjustment
(1) Use
• Specifies the alignment between the sides of paper (binding position adjustment) in
duplex printing.
• To achieve faster printing performance, select Productivity Priority. To address misalign-
ment problems between sides of copies in the horizontal and vertical directions, select
Finishing Priority.
Finishing Priority
Productivity Priority
Control Adjustments : Comply with the command from the printer driver and does not
(2) Procedure
• The default setting is Finishing Priority.
"Finishing Priority"
H. Line Width Adjustment
(1) Use
• To correct line width of the output data during PC print.
(2) Procedure
• The default setting is Thin.
"Thin"
I. Gray Background Text Correction
(1) Use
• Letters or lines on a gray background may look thicker than those on a non-gray back-
ground.
ON : Makes characters and lines on a grayscale background thicker and sharpens
the outlines of characters and figures
OFF : Makes grayscale background text correction by selecting Thin, Normal, or Thick
in [Line Width Adjustment]. If selecting "ON" makes lines too thick, select "OFF."
(2) Procedure
• The default setting is ON
294
ON
: Able to optimize sides aligning operation as the process is per-
formed after the machine receives all of the print data.
: Able to accelerate print speed as sides alignment proceeds
together with data reception and print operation.
take the side alignment step.
Productivity Priority
Normal
"ON"
Service Manual
Field Service Ver. 2.0 Jul. 2009
"OFF"
Control Adjustments
Thick
OFF
Y110571-1