Field Service Ver. 2.0 Jul. 2009
5.5.67
Scanner motor (M201)
A. Removal procedure
1. Remove the scanner rear cover.
See P.85
2. Remove the scanner upper rear cover /1.
See P.86
[4]
[1]
[1]
Y110571-1
[1]
[2]
[3]
A0P0F2C144DA
[1]
A0P0F2C145DA
[1]
[2]
[1]
A0P0F2C146DA
Service Manual
5. OTHER MAINTENANCE ITEMS
3. Remove the connector [1] and take
out the harnesses from two wire sad-
dles [2].
4. Then remove the screw [3] to take
out the 15 degree sensor assy [4].
5. Remove the harness from three
edge covers [1].
6. Remove six screws [1], and remove
the ADF table [2].
159