Olivetti d-Color MF651 Service Manual page 567

Field Service Ver. 2.0 Jul. 2009
C. Detail Setting
(1) Basic Setting (E-Mail1, E-Mail2, Modem or Fax)
<Use>
• Execute the primary setting.
• Use to change the set contents.
• Use to register the machine to the CS Remote Care center.
<Procedure>
1. Call the Service Mode to the screen.
2. Touch [CS Remote Care].
3. Touching the [Detail Setting] will display the primary setting.
<Center Setting>
• Set the center ID, Device ID, and the phone No.
• When e-mail is selected for system and all setup procedures are completed, e-mail
address of the center is displayed.
* When entering the phone number, 10-keys and keys on the screen have following mean-
ings.
[-] Pose : Waits to start transmitting after dialing
[W] Wait : Detects the dial tone of the other end
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*], [#] : To be used as necessary
<Schedule (Only when the [E-Mail2] is selected)>
• Set the schedule of notification to the center.
• Up to three different notification schedules can be registered.
• Select the notification cycle from [Day], [Week], or [Month].
When selecting [Day] for the notification cycle, set the Day Frequency.
When selecting [Week] for the notification cycle, set the Week Frequency and day of the
week.
When selecting [Month], set the Month Frequency and the date of the month.
<Center Notification (Only when the [E-Mail2] is selected)>
• Select the items of data that will be sent to the center in one-way transmission through E-
Mail2.
• The following table shows each of the notification item keys and corresponding data.
[1] Sales count data
[2] Error count data
[3] Service count data
Life count data
[4]
Life cycle data
CSRC-System data
[5]
Device config data
[6] History data
NOTE
• Multiple items of data can be selected and sent at one time. However, be sure that
only EKC data cannot be sent together with other items of data.
Y110571-1
[7] EKC data
[8] Adjustment data
[9] Coverage data
[10] Not used
[11] Not used
[12] Not used
Service Manual
12. SERVICE MODE
507