Fs-Fn Adjustment - Half-Fold Position - Olivetti d-Color MF651 Service Manual

12. SERVICE MODE
12.16.2

FS-FN adjustment - Half-Fold Position

A. Use
• Use this adjustment to adjust the half-fold position in half-fold printing.
B. Procedure
1. Place two sheets of originals on the ADF.
2. Make a copy in the folding mode.
3. Fold the copies along the crease.
4. Measure the amount of deviation (A).
Specification A: 0 ± 1.0 mm
Adjustment range: -10.0 mm to +10.0 mm (1 step: 0.1 mm)
5. If (A) is out of the specified range, make the following adjustment.
6. Call the Service Mode to the screen.
7. Touch [Finisher]
8. Touch the paper size where half-fold position is adjusted.
9. Look at the copy and adjust the half-fold position with the [+]/[-] key.
10. Press the Reset key.
11. Touch [Exit] on the Service Mode screen.
12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
13. Make another set of copy sample and check the amount of deviation (A).
598
Exit direction
[FS-FN adjustment]
Service Manual
Field Service Ver. 2.0 Jul. 2009
A
[Half-Fold Position].
A11PF3C502DA
A11PF3C503DA
Y110571-1