Network Setting-Http Server Settings - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009
10.6.38

Network Setting-http Server Settings

• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode]
A. http Server Settings
(1) Use
• To set whether or not to use the http server setting.
(2) Procedure
• The default setting is ON.
B. PSWC Settings
(1) Use
• To set whether to use the PageScope Web Connection.
(2) Procedure
• The default setting is ON.
C. IPP Settings
(1) Use
• To set whether to enable or disable IPP (Internet Printing Protocol) setting.
(2) Procedure
• The default setting is ON.
D. Accept IPP jobs
(1) Use
• To set whether to allow or restrict the IPP job.
(2) Procedure
• The default setting is ON.
E. Support Information
(1) Use
• To set the operation support information.
• For the response setting to see if IPP transmission supports each function.
(2) Procedure
1. Touch [Support Information].
2. Set "ON" or OFF for each item.
Y110571-1
[Billing Setting] [Management Function Choice]
"ON"
"ON"
"ON"
"ON"
Service Manual
10. UTILITY
OFF
OFF
OFF
OFF
375