Olivetti d-Color MF651 Service Manual page 496

10. UTILITY
(2) Procedure
• The default setting is Mode 1.
NOTE
• [Mode1] cannot be selected when the following setting is set to "ON."
[Administrator Settings]
• Only the number of times for trials up to the access lock can be changed.
• When [Mode 2] is selected, set the number of times where checks are made before
access is locked.
• Touch [Release Time Settings] and set a period of time that elapses before access lock
is released.
C. Confidential Document Access Method
(1) Use
• To display the status of the authentication system on the control panel for the confidential
document access.
• It cannot be changed at the operator's option since it will automatically be set according
to the [Prohibit Functions When Auth. Error] setting.
• It will be set to [Mode 1] when [Prohibit Functions When Auth. Error] is set to
[Mode 1].
It will be set to [Mode 2] when [Prohibit Functions when Auth. Error] is set to
[Mode 2].
Mode 1 : This mode is for authentication by confidential document ID and password. It
displays the list of the corresponding confidential document to print them.
Mode 2 : This mode is for authentication by confidential document ID. It displays the list
of the corresponding confidential document, and print them with authentica-
tion by password.
NOTE
• [Mode1] cannot be selected when the following setting is set to "ON."
[Administrator Settings]
(2) Procedure
• The default setting is Mode 1.
D. Manual Destination Input
(1) Use
• To set whether to allow or prohibit to manually enter the destination address on the desti-
nation Input screen.
• To prohibit entering the destination address manually.
(2) Procedure
• The default setting is Allow.
436
"Mode 1"
[Security Setting]
[Security Setting]
"Mode 1"
"Allow"
Service Manual
Field Service Ver. 2.0 Jul. 2009
Mode 2
[Enhanced Security Mode]
[Enhanced Security Mode]
Mode 2
Restrict
Y110571-1