Olivetti d-Color MF651 Service Manual page 419

Field Service Ver. 2.0 Jul. 2009
F. When # of Jobs Reach Maximum
(1) Use
• To set whether to stop the currently printing job and start the next job, or to stop the
machine, when reaching to the upper limit for the number of printed pages set by the
user authentication and the account track.
• To stop the machine when the number of printed pages reach the upper limit set by the
user authentication and the account track.
(2) Procedure
• The default setting is Skip Job.
G. Number of User Counters Assigned
• It will not be displayed when the following setting shows that management device 2 is
mounted.
[Service Mode]
(1) Use
• To set the number available to be assigned for the user registration and account registra-
tion.
(2) Procedure
• The default setting is 500.
• The total number to be registered for the user authentication and account track is 1000.
The number for the user registration will be set.
* When setting the [# of Counters Assigned for Users] to 50, the number available for
Account Track will be 950.
NOTE
• The setting is available only when carrying out the user authentication and
account track.
H. Ticket Hold Time Setting
(1) Use
• Specify the desired length of holding time of Kerberos authentication ticket.
NOTE
• This setting takes effect only when the authentication server type is set to active
directory.
(2) Procedure
• The default settings is 60 min.
Y110571-1
"Skip Job"
[Billing Setting] [Management Function Choice]
1 to "60 min."
Service Manual
10. UTILITY
Stop Job
359