10.8 My Panel Settings; 10.9 Device Information - Olivetti d-Color MF651 Service Manual

10. UTILITY

10.8 My Panel Settings

• This is displayed only when a registered user is logging in after user authentication.
However, this is not displayed when both management device 2 and user authentication
are used.
A. Use
• To make various settings about My Panel.
• To customize My Panel screen for individual registered users.
• Items that can be set are as follows:
Language Setting, Measurement Unit Setting, Copier Settings, Scan/Fax Settings, Color
Selection Setting, Main Menu Settings, and Initial Screen Setting
B. Procedure
1. Touch [My Panel Settings].
2. Touch a key that represents a desirable item and change its settings.
NOTE
• Registering, editing, and deleting My Panel settings are allowed only when logging
in as a registered user.
• When My Panel is not customized, the settings for MFP take effect in the three of
the control panel settings, Language setting, Measurement unit setting, and Color
selection setting.
• Depending on the functions provided by each MFP and the optional device config-
uration, not all My Panel settings may not take effect.

10.9 Device Information

• It will be displayed in d-Color MF651/MF551 machines where the function version is
version 2 or later and in all d-Color MF451 machines.
A. Use
• To display the function version of the firmware installed in MFP and the IP address.
B. Procedure
• Touch [Device Information] to check the function version and IP address.
<About function version>
Function version
Model
d-Color MF651/MF551
d-Color MF451
MF360/MF280/MF220
450
Version 1
Initial firmware Function enhancement 1
-
-
Service Manual
Field Service Ver. 2.0 Jul. 2009
Version 2
Initial firmware
Initial firmware
Y110571-1