16. MECHANICAL ADJUSTMENT
16.2.4
Centering adjustment of the tray 3/4
This adjustment must be made in the following case:
• When adjustment in the following screen does not resolve a problem.
[Service Mode]
1. Make a test print and check the amount of misalignment.
2. Pull out the tray where this adjustment is made.
[1]
[1]
[1]
650
[Machine]
[Centering]
A00JF3C005DA
[1]
A00JF3C006DA
[2]
A00JF3C007DA
Service Manual
Field Service Ver. 2.0 Jul. 2009
3. Stretch the paper guide [1] to the
maximum size position.
4. Loosen ten screws [1].
5. Move the paper guide [1] complete
according to the amount of the mis-
centering you checked in step 1 and
adjust the center position of it.
6. Tighten ten screws [2].
7. Make another test print and check
the amount of misalignment.
Y110571-1