Olivetti d-Color MF651 Service Manual page 109

Field Service Ver. 2.0 Jul. 2009
[2]
[1]
[2]
11. Select [Service Mode]
release for the transfer belt unit.
See P.544
12. Select [Service Mode]
carry out gradation adjust.
See P.482
Y110571-1
4. PERIODICAL MAINTENANCE PROCEDURE
[1]
A00JF2C609DA
[2]
[1]
A00JF2C608DA
[Counter/Data]
[Imaging Process Adjustment]
Service Manual
NOTE
• When removing/reinstalling the
transfer belt unit, be sure not to
allow the contact [1] to hit the screw
[2] of the transfer belt unit lock.
10. To reinstall, reverse the order of
removal.
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Before reinstalling the transfer belt
unit, make sure that the two trans-
fer belt unit locks [1] are completely
unlocked. Insert the transfer belt
unit by pressing the area [2] (two
places) shown in the illustration on
the left until the transfer belt unit is
fitted into its place.
[Life] [New Release] and carry out new
[Gradation Adjust] and
49