ACS Service
HandyTool
*005 Plant type
32/166
Siemens
Building Technologies
The application can be selected under Commissioning .
Setting
Application
FNC02 (FC-10)
1
FNC04 (FC-10)
2
FNC08 (FC-10)
3
FNC20 (FC-10)
4
FNC10 (FC-11)
1
FNC12 (FC-11)
2
FNC18 (FC-11)
3
FNC03 (FC-12)
1
FNC05 (FC-12)
2
4.2
Parameter settings
The following chapters describe how to set the parameters, which differs only slightly
among the two PC tools. Only the display differs.
RXB (KNX) application library
Applications, parameters
FNC Description of functions for FC-10, FC-11, FC-12
CM110385en_05
28 Feb 2009