Window Switch (S-Mode); Presence Detector (S-Mode); Dewpoint Sensor (S-Mode) - Siemens Desigo RXB Technical Manual

96/140
Siemens
Building Technologies
9.1.1

Window switch (S-Mode)

For master/slave mode, only the master's window switch is evaluated without special
measures, which also influences the slave controllers.
If another window switch is also connected to the slave, it is NOT considered unless
you create the following binding:
Window contact Input
This binding ensures that both controllers react when a window is opened.
If several slaves are equipped with window switches, the correct evaluation is required
for the logic block.
9.1.2

Presence detector (S-mode)

For master/slave mode, only the master's presence detector is evaluated without
special measures, which also influences the slave controllers.
If another presence detector is also connected to the slave, it is NOT considered unless
you create the following binding:
Presence detector Input
This binding ensures that both controllers react when a presence detector becomes
active.
If several slaves are equipped with presence detectors, the correct evaluation is required
for the logic block.
9.1.3

Dewpoint sensor (S-mode)

For master/slave mode, only the master's dewpoint sensor is evaluated without special
measures, which also influences the slave controllers.
If another dewpoint sensor is also connected to the slave, it is NOT considered unless
you create the following binding:
Dew point sensor Input
This binding ensures that both controllers react when a dewpoint sensor becomes active.
If several slaves are equipped with dewpoint sensors, the correct evaluation is required
for the logic block.
RXB (KNX) Applications library
Master/slave
Master
DI
Master
DI
Master
DI
CLC and RAD description of functions for CC-02 CM110384en_03
Slave
Window contact Output
DI
Slave
Presence detector Output
DI
Slave
Dew point sensor Output
DI
28 Feb 2009
10385Z118en
10385Z119en
10385Z120en