ACS Professional
Reduce bus load
HandyTool
Notes
Siemens
Building Technologies
The zones are defined under Communication.
Individual zones can also be disabled via command if they are not being used. This has
the advantage of reducing the load on the bus.
See the parameter in the last column of the following table.
Short name
Geogr zone (ap)
Geogr zone (room)
Geogr zone (subz)
T'swi zone (apartm)
TS zone (room)
TS zone (subzone)
Heat distr zone
Refrig distr zone
Outside temp zone
• Value 0 means broadcast and is thus not allowed.
• If the geogr zone or a TS zone has value = -1 for one of the three values, the entire
zone is out of service.
RXB (KNX) Applications library
Select communications mode
Basic setting
–1 (out of service)
1
1
1
1
1
–1 (out of service)
–1 (out of service)
1
CLC and RAD description of functions for CC-02 CM110384en_03
Parameter
*008
*009
*010
*011
*012
*013
*016
*017
*018
23/140
28 Feb 2009