Function Settings; General; Buzzer Volume; Password Expert Level - Siemens Synco living QAX913 Mounting And Commissioning

Function settings

General

You must be at the expert level to enter function settings (see page 19).
Change these settings only if you are fully aware of their impact.
Wrong settings can impair or even disable plant operation.

Buzzer volume

The volume of the buzzer (piezzo loudspeaker) integrated in the central
apartment unit can be adjusted to suit individual needs (0..100%).
Main menu > Settings > Device > Buzzer volume:
Guide value
If the buzzer volume is too low, you may not hear the acoustic signals
(e.g. those of the binding test).

Password expert level

The unit is supplied with password "9" to access the expert level. For safety
reasons, change the password to another value.
When you change the password, write it down and keep it in a safe
place. If you forget your password, a service visit by the expert is re-
quired!
Enter the required new password (between 0 and 9999) using the following
path and press the Menu/ok button to confirm.
Main menu > Settings > Passwords > Expert:

Apartment

Enable setpoint limitation

Specifies if setpoint limitation of the room temperatures is basically disabled or
enabled. Only when setpoint limitation is enabled does the central apartment
unit respond to the setpoint limitation signals received over the wired bus. The
limitation setpoints act for as long as setpoint limitation is enabled provided no
setpoint limitation signals were received via the bus.
Main menu > Apartment > Settings > Setpoint limitation:
Disabled
Enabled
Siemens
Building Technologies
100 %
Setpoint limitation is disabled.
Setpoint limitation is enabled (factory setting).
Synco™ living
Function settings
95 / 134
CE1C2740en
13.12.2010