Siemens Desigo RXB Technical Manual page 24

14
Addressing
Every device must have its own physical address.
Addresses can be assigned with one of the three tools.
Options for connecting the tools
KNX
*)
1
1. ETS3 or ACS connected to standard room unit *)
2. ETS3 or ACS connected to RXB controller *)
3. ETS3 or ACS connected to KNX bus *)
4. "HandyTool" connected to standard room unit
5. "HandyTool" connected to RXB controller
*) via OCI700 USB KNX port
*)
3
*)
2
Building autometion
interface
PPS2
4
PPS2
5