Rxb Application Example With Rmb795 For Geographical And Time Switch Zones - Siemens Desigo RXB Technical Manual

Building floor plan
User requirements /
operating modes
Floor plan, third floor
Key
24/140
Siemens
Building Technologies
3.2 RXB application example with RMB795 for
geographical and time switch zones
The room group philosophy is applied to the following example. This example uses
FNC applications. CLC and RAD applications, however, apply the same principle.
The building has three stories used by different companies for their headquarters. The
following companies rent offices on the third floor:
– Company Sport AG with conference room and two offices.
– Company Logistics GmbH with 6 offices and 1 meeting room.
Each of the two companies wants to operate their room groups at different operating
modes, i.e. with the following separate items:
– Schedules.
– Setpoints.
– Fire and smoke extraction functions.
The following example shows the rooms on the third floor for Logistik GmbH and Sport
AG:
D: 101
G: 4.1.1
301
Conference room
Conference
room
D: 114
G: 1.1.1
309
D: 113
G: 2.4.1
Sport Ltd
Office
308
D: 112
G: 2.3.1
D: 111
G: 2.2.1
D = Device address, G = Geographical zone (Apartment . Room . Subzone).
RXB (KNX) Applications library
Select communications mode
D: 103
D: 102
G: 4.2.1 G: 3.1.1
302
Reception
Logistics Ltd
RMB795
Office
307
D: 110
G: 2.1.1
CLC and RAD description of functions for CC-02 CM110384en_03
D: 104
G: 3.2.1
D: 105
303
G: 3.3.1
Office
304
Office
D: 106
G: 3.4.1
D: 107
G: 3.5.1
305
Office
Office
306
D: 108
G: 3.6.1
D: 109
G: 3.7.1
28 Feb 2009