Select Communications Mode - Siemens Desigo RXB Technical Manual

Note
ETS3 Professional
20/140
Siemens
Building Technologies
3

Select communications mode

Section 1 shows that RXB room controllers can work in both S- and LTE mode. They
are used in S-mode when networked with the DESIGO automation and control system,
and in LTE mode with Synco.
The factory setting of all controllers and the basic setting of the tools is 0 = S-Mode.
This minimizes the bus load.
Exception: ACS Service changes the setting immediately to 1 = LTE + S.
The ETS3 Professional is used in DESIGO networks.
It can be used for operation in
– S-mode.
– LTE-mode and S-mode.
The send heartbeat and receive timeout are described in section 10.1.
RXB (KNX) Applications library
Select communications mode
CLC and RAD description of functions for CC-02 CM110384en_03
28 Feb 2009