Siemens Desigo RXB Technical Manual page 90

LTE-mode
communication objects
Note
HandyTool
HandyTool
Note
10/140
Siemens
Building Technologies
All communication objects operating in LTE mode are described as follows:
Possible partner function
blocks
HVACMode 1) 110 HVACS
HVAC-Mode Scheduler
TimeswitchZone 2)
104 PMC
Program to HVAC-Mode
Conversion
Key
1) The name of the LTE communication object is entered here.
2) Each LTE communication object is assigned to a zone.
This is recorded here.
3) This is where suitable partner function blocks are listed. They are described in the
Konnex specification.
4) The devices listed here (manufacturer and type) are suitable partners for the
communication object.
For a list of all the LTE-mode communication objects used, refer to section 12.6. For
details of the Konnex data types refer to Section 12.7.
The left margin contains the symbol for the HandyTool next to a table containing the
parameter number, short name and default value.
The number has syntax *xxx, with xxx being a three-digit number.
Parameters Short name
*069 Comfort heating setpoint
A list of the parameters by number and in alphabetical order is located in chapters 12.7
and 12.8, and in the description of the functions.
A table of parameters with enumerations fort he HandyTool is shown in Section 12.9.
RXB (KNX) Applications library
Definitions / Tools
Known partner devices
3)
Siemens:
Synco RM700
CLC and RAD description of functions for CC-02 CM110384en_03
Basic setting
25.0 °C
28 Feb 2009
4)