Basic Communication Settings; Distributed Bus Power; Clock Time Operation - Siemens RXB Series Basic Documentation

Note

Clock time operation:

Master (time master)
Clock time operation:
Slave (time slave)
Clock time operation:
Autonomous
For internal use only
Siemens
Building Technologies
6

Basic communication settings

6.1 RM... controllers
6.1.1

Distributed bus power

The type of bus power supply is set on the "Basic settings" operating page on the
"Dec bus power supp" line.
Main menu > Commissioning > Communication > Basic settings
Basic settings
Device address:
Dec bus power supp:
Clock time op: Master
Rem set clock slave:
Distributed bus power supply, RM... controllers
Default value. On.
Setting values Off/On
In small networks, the KNX bus can be operated with default value "Dec bus power
supp: On". See Section 2.2 for information about the bus power supply.
6.1.2 Clock time operation
"Clock time operation" refers to the transmission of the date and time. For the
RM... controllers, this is set on the "Clock time op:" line of the "Basic settings"
operating page.
Main menu > Commissioning > Communication > Basic settings
Basic settings
Device address:
Dec bus power supp:
Clock time op: Master
Rem set clock slave:
Basic settings
Device address:
Dec bus power supp:
Clock time op: Slave
Rem set clock slave:
Basic settings
Device address:
Dec bus power supp:
Clock time op: Autonomous
Rem set clock slave:
Clock time mode, RM... controllers
Default value. Master
Setting values Autonom. / Slave / Master.
KNX bus communications
Basic communication settings
10
On
Yes
10
On
Yes
10
On
Yes
10
On
Yes
35 / 88
CE1P3127en
2013-04-08