ACS Service
HandyTool
124/166
Siemens
Building Technologies
The following functions are enabled or configured under General or Central functions .
*) Room number and Device name do not influence the application; they are used only
for plant documentation purposes. We recommend to use this feature.
The general and central functions are set with parameters 117 – 137. For detailed
information, refer to the individual sections.
RXB (KNX) application library
General and central functions
FNC Description of functions for FC-10, FC-11, FC-12
11.2
11.3
11.4
*)
11.16
CM110385en_05
28 Feb 2009