Configuring A Wireless Connection - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 2 Setting Up the IEC
Figure 2-15
If you change the network connection, the Cisco IEC 4600 Series device's IP address will change. Be
sure to record the new IP address.

Configuring a Wireless Connection

If you want to configure a wireless connection to the network using DHCP or a static IP address, follow
these steps:
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Network icon.
Step 2
Reboot Icon in the System Settings Window
Cisco Interactive Experience Client 4600 Series User Guide
Connecting to the Network
2-25