Table of Contents
Advertisement
8
Configuring Video Output
In the Settings area, click DMP Display Attributes.
Step 1
The display autodetection feature is enabled by default.
If you are satisfied with the choices and entries that
DMPDM made for you, you are done with this section
and you can go now to the
Management" section on page
Otherwise, if you are not satisfied, do the following:
a. From the DMP Display Autodetection (requires
HDMI) list, choose Disable.
b. From the Display Standard list, choose the standard
that applies in your country. For example, even
though our factory default selection is NTSC_M,
your country might use PAL instead.
Choose from the Select an Event Type list the
–
system task that you named in Step 5b.
Click Submit.
–
"Setting Up Centralized
23.
21
Advertisement
Table of Contents
