Enabling The Debug Mode - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 3 Configuring Settings
Figure 3-56
Step 4 If you want to keep how the entries are sorted for the next time you access the logs, click Close. If you
want all entries to display the next time you access the logs, uncheck all the check boxes and then Click
Close.

Enabling the Debug Mode

The Debug mode can be enabled. Since debugging is an application that runs in the background, it will
affect performance of the Cisco IEC 4600 Series if it is enabled. To enable the Debug mode, follow these
instructions:
Step 1 Press Ctrl-Alt-S to display the System Settings window.
Step 2 Click the System Logs icon.
PID Check Box and Fields
Cisco Interactive Experience Client 4600 Series User Guide
System Logs
3-45