Cisco Interactive Experience Client 4600 Series User Manual page 114

IEC Firmware Upgrade Using the IEM
Figure 5-19
Click upload.
Step 21
The file will appear in the Specification list. All three files should now be uploaded.
In the right pane, click enable.
Step 22
The version is now active. In the Active column, the word "Yes" appears.
Figure 5-20
The images will become available for pushing to the IECs that are registered and active in the IEM.
Deactivate the previous version if one was already activated. You do not need to delete older versions.
Saving XML Files
The specification file is an XML file. If it is incorrectly saved, it will report 'Specification is not found'
when uploading to the IEM. Follow the steps below to save the file correctly to avoid the error message.
Open a recommended browser on your computer.
Step 1
Enter the specification file URL.
Step 2
Cisco Interactive Experience Client 4600 Series User Guide
5-8
Specification File in Upload Image Dialog Box
Active Column
Chapter 5 Upgrading the IEC