Cisco Interactive Experience Client 4600 Series User Manual page 153

Chapter 7 Locally Configuring the IEC
To change the acceleration, slide the acceleration bar, enter a value between 0.0 and 20.0, or press the
Step 3
Up Arrow or Down Arrow to pick a value.
Figure 7-39
To change the threshold, slide the threshold bar, enter a value between 0 and 20, or press the Up Arrow
Step 4
or Down Arrow to pick a value.
When you complete the selections in this window, click Apply.
Step 5
To exit the Mouse window, click Close.
Step 6
In the System Settings window, click Reboot.
Step 7
Figure 7-40
Acceleration and Threshold Slide Bars
Reboot Icon in the System Settings Window
Cisco Interactive Experience Client 4600 Series User Guide
Mouse Settings
7-27