Cisco Interactive Experience Client 4600 Series User Manual page 76

Network Settings
Figure 3-22
If the DHCP check box is checked, uncheck the Use DHCP check box.
Step 8
Enter the IP address in the IP Address field.
Step 9
Enter the subnet mask in the Subnet Mask field.
Step 10
Enter the gateway address in the Gateway field.
Step 11
Enter the primary DNS server's IP address in the Primary DNS server IP Address field.
Step 12
If there is a second DNS server, enter the secondary DNS server's IP address in the Secondary DNS
Step 13
server IP Address field.
When you complete the selections in this window, click Apply.
Step 14
To exit the Network window, click Close.
Step 15
In the System Settings window, click Reboot.
Step 16
Cisco Interactive Experience Client 4600 Series User Guide
3-20
IP Address Configuration Fields
Chapter 3 Configuring Settings