Autoconfiguration Script Option - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 3 Configuring Settings
Set the port number by using the arrows or entering a value in the Port field.
Step 6
Enter the user name in the User name field.
Step 7
Enter the password in the Password field.
Step 8
When you complete the selections in this window, click Apply.
Step 9
To exit the Proxy Server window, click Close.
Step 10
In the System Settings window, click Reboot.
Step 11
Figure 3-26

Autoconfiguration Script Option

Follow these steps to enable a proxy server using an autoconfiguration script:
Step 1 Press Ctrl-Alt-S to display the System Settings window.
Step 2 If the IEC is managed by an IEM, enter its maintenance code.
Step 3 Click the Proxy Server icon.
Reboot Icon in the System Settings Window
Cisco Interactive Experience Client 4600 Series User Guide
Proxy Server Settings
3-23