Cisco Interactive Experience Client 4600 Series User Manual page 94

System Settings
Figure 3-47
Step 21 Enter the user name in the User name field.
Step 22 Enter the password in the Password field. To verify that you entered the correct password, check the
Show password check box to see the characters entered.
Step 23 Click the Register button.
Step 24 Once the account is registered, you will see the word "Success".
Figure 3-48
Click the Reboot now button.
Step 25
Resetting the Device
The Cisco IEC 4600 Series can be reset to factory settings at any time.
There are two methods for resetting the device to factory settings:
1.
2.
Cisco Interactive Experience Client 4600 Series User Guide
3-38
Account Details Dialog Box
Account Details Dialog Box Showing Success Message
Insert a pin in the Reset hole on the side of the IEC and hold it for five seconds.
Click the Reset to defaults button in the Device tab. Follow the steps below to reset the device to
factory settings using this option.
Chapter 3 Configuring Settings