Cisco Interactive Experience Client 4600 Series User Manual page 123

Chapter 6 Debugging Console
Command
debug
release
memstat
cpustat
iostat
dstat
lsusb
lsinput
httphead
<url>
ifconfig
traceroute
<host
address>
nslookup
<host
fqdn>
The angle brackets (<>) indicates a required value. The square brackets ([]) indicate an optional value.
Note
The figure below shows the output when the administrator entered the memstat command.
Figure 6-5
The figure below shows the output when the administrator entered the lsusb command.
Table 6-3 Debugging Commands
Description
Switch the device to debug mode to generate log messages. Since this mode can
generate many messages, it might compromise device performance. The device must
be rebooted to start all the applications in debug mode.
Switch the device to release mode to stop debug level logging. The device must be
rebooted to start all the applications in release mode.
Print memory statistics
Print CPU statistics
Print I/O statistics
Print local storage statistics
List connected USB devices
List connected input devices
Send HEAD request to URL url. Response header will be printed.
Show network interfaces configuration.
Track the route packets taken from an IP network on their way to a given host.
Query Internet domain name servers to find out host's IP addresses.
memstat Command Output
Cisco Interactive Experience Client 4600 Series User Guide
Debugging Console
6-5