Cisco Interactive Experience Client 4600 Series User Manual page 55

Chapter 2 Setting Up the IEC
Figure 2-40
Click Create.
Step 7
After the policy is created, open the policy and click the Policy tab.
Step 8
Find the remoteview > enabled property.
Step 9
Change the value to true.
Step 10
Figure 2-41
Click Apply.
Step 11
When you are ready to use a VNC viewer to access an IEC, go to the IEM and find the device that you
Step 12
want to access using a VNC viewer.
From the Custom actions menu, click the custom action that you created for VNC such as "VNC_Start".
Step 13
Launch a VNC viewer.
Step 14
In the VNC Server field, enter the IEC's IP address followed by a colon and the port number. For
Step 15
example, 188.32.16.55:5980.
Create a Custom Action for the VNC Viewer
remoteview.enabled Property
Cisco Interactive Experience Client 4600 Series User Guide
Using a VNC Viewer
2-43