Cisco Interactive Experience Client 4600 Series User Manual page 44

Connecting to the Network
Figure 2-23
Step 8 Choose to use DHCP or a static IP address:
To use DHCP, check the Use DHCP check box.
To use a static IP address:
Uncheck the Use DHCP check box.
a.
Enter the IP address in the IP Address field.
b.
Enter the subnet mask in the Subnet Mask field.
c.
Enter the gateway address in the Gateway field.
d.
Enter the primary DNS server's IP address in the Primary DNS server IP Address field.
e.
If there is a second DNS server, enter the secondary DNS server's IP address in the Secondary DNS
f.
server IP Address field.
Click Apply.
Step 9
To exit the Network window, click Close.
Step 10
In the System Settings window, click Reboot.
Step 11
Cisco Interactive Experience Client 4600 Series User Guide
2-32
IP Address Tab
Chapter 2 Setting Up the IEC