Cisco Interactive Experience Client 4600 Series User Manual page 57

Configuring Settings
Revised: April 3, 2015
Chapter Overview
The IEC 4600 Series should be configured from the IEM by applying policies and configuring its profile.
Note
This chapter is only for configuration of a single IEC that is not connected to an IEM such as for demo
purposes.
This chapter explains how to use the System Settings menu to configure the IEC 4600 Series settings for
the network, proxy, and system. It also explains how to sort logs and reboot the IEC.
The topics in this chapter include the following:
•
•
•
•
•
Network Settings, page 3-2
- Configuring an Ethernet Connection using DHCP, page 3-2
Configuring an Ethernet Connection using a Static IP Address, page 3-4
-
Configuring a Wireless Connection using DHCP, page 3-6
-
Configuring a Wireless Connection using a Static IP Address, page 3-14
-
Proxy Server Settings, page 3-21
Static Option, page 3-21
-
Autoconfiguration Script Option, page 3-23
-
Autoconfiguration URL Option, page 3-25
-
System Settings, page 3-27
Setting Management Mode, page 3-27
-
Setting Standalone Mode, page 3-30
-
- Changing the IEM's URL, page 3-32
System Logs, page 3-40
- Sorting Logs, page 3-41
Enabling the Debug Mode, page 3-45
-
Reboot, page 3-46
C H A P T E R
Cisco Interactive Experience Client 4600 Series User Guide
3
3-1