Selecting The Time Zone - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 7 Locally Configuring the IEC
Figure 7-12
In the time field, enter the hour, minute, and second.
Step 6
Click Apply to set the new date and time.
Step 7
To exit the Date and Time window, click Close.
Step 8

Selecting the Time Zone

The time zone is automatically determined by default. If the time zone is incorrect or you want to change
it, follow the steps below.
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Date and Time icon.
Step 2
Setting the Date and Time Manually
Cisco Interactive Experience Client 4600 Series User Guide
Date and Time Settings
7-9