Cisco Interactive Experience Client 4600 Series User Manual page 199

Video Conferencing Using the Session Initiation
Protocol Client
Revised: April 3, 2015
Appendix Overview
The Session Initiation Protocol (SIP) client enables a customer at the kiosk to make a SIP audio and
video call with a remote assistant.
Topics in this appendix include:
•
•
•
•
•
•
•
•
SIP Recommendations
The following are recommendations when using SIP:
•
SIP Recommendations, page F-1
SipPhone Widget, page F-2
- Sample Test Code, page F-5
IEC Preparation, page F-13
SIP Client, page F-14
Cisco IP Phone Set Up on the CUCM, page F-14
Finding The IP Phone's MAC Address, page F-25
-
Cisco IEC Set Up on the CUCM, page F-26
Configuring Call Manager Information, page F-38
Using a Policy on the IEM, page F-38
-
Using the SipPhone Widget, page F-44
-
SIP DTMF, page F-45
Sample usage of sendDtmf() API, page F-46
-
SIP video quality is dependent on the available network link. At least 1Mbps of available bandwidth
between the end-points is recommended for HD-quality video call.
A P P E N D I X
Cisco Interactive Experience Client 4600 Series User Guide
F
F-1