Cisco Interactive Experience Client 4600 Series User Manual page 85

Chapter 3 Configuring Settings
Enter the device description in the Device Description field.
Step 4
Enter the device location in the Device Location field.
Step 5
Enter the Cisco IEM address in the Manager host field.
Step 6
Click the Switch to managed button. The Account Details dialog box opens. The information entered
Step 7
here will be used to access the Cisco IEM. If you do not know this information, obtain it from the
administrator who installed and configured the Cisco IEM.
Step 8 Enter the account name in the Account field.
Figure 3-35
Enter the user name in the User name field.
Step 9
Enter the password in the Password field. To verify that you entered the correct password, check the
Step 10
Show password check box to see the characters entered.
Click Register.
Step 11
Once the account is registered, you will see the word "Success".
Step 12
Figure 3-36
Click Reboot now.
Step 13
Account Details Dialog Box
Registration Successful Message
Cisco Interactive Experience Client 4600 Series User Guide
System Settings
3-29