Cisco Interactive Experience Client 4600 Series User Manual page 121

Chapter 6 Debugging Console
Figure 6-3
To view a list of commands, type help and press the Enter key.
Step 4
Figure 6-4
Type the command you desire and press the Enter key.
Step 5
To close the console window, click the X in the upper left corner of the window.
Step 6
General Commands
Enter the following commands to show general information about this utility and the IEC such as the list
of commands, the IEC's serial number, and Device Maintenance Code. General commands also include
those that reboot and reset the IEC to factory default settings.
Console Window
Command List
Cisco Interactive Experience Client 4600 Series User Guide
Debugging Console
6-3